KNX B.E.G. Brück Electronic GmbH

KNX

Filter products

Discontinued product
KNX B.E.G. Brück Electronic GmbH
93336

SA8 - 230 / 16 / H / KNX REG

grey

Switching actuator for switching loads

The switching contacts are optimised for capacitive loads

Manual switches for switching without bus tension

Go to product
Discontinued product
KNX B.E.G. Brück Electronic GmbH
93980

DIM4-230/1-10V/16/H/KNX REG

–

The lights are regulated by way of 1-10V voltage. The voltage 1-10V is provided by the EBs.

The device is equipped with short circuit and temperature protection, as well as a lamp-preserving soft start

The device is planned for permanent installation on a DIN-rail (top-hat) in high voltage current distributors

Go to product
Discontinued product
KNX B.E.G. Brück Electronic GmbH
90222

DIM4-230/UNI/250/H/KNX REG

grey

4 x 250 W, HV LED lamps typ. 4 x 7 ... 50 W 1 x 950 W

Automatic or manual selection of the dimming principle suitable for the load

Open-circuit, short-circuit and over temperature protected

Go to product
Discontinued product
KNX B.E.G. Brück Electronic GmbH
90139

SA4 - 230 / 16 / H / EM / KNX REG

grey

Switching actuator for switching loads

Transformer-based current measurement (± 10mA)

True effective value measurement (current)

Go to product
93806

WS-VOC-HVAC-KNX

white

KNX Wall-Mounted Air Quality Sensor (VOC) with integrated temperature controller, PI, two-point, and PWM control, as well as a multicolor air quality indicator.

Go to product
93174

PB4-KNX-ST

white

4-gang KNX wall-mounted push-button switch with LED status indicators for 60-mm flush-mount boxes, compatible with 55×55-mm switch series (includes 64×64-mm adapter).

Go to product
93178

PB8-KNX-ST

white

8-gang KNX wall-mounted push-button switch with LED status indicators for 60-mm flush-mount boxes, compatible with 55×55-mm switch series (64×64-mm adapter included).

Go to product
93172

PB2-KNX-ST

white

KNX 2-gang wall-mounted push-button switch with LED status indicators for 60-mm flush-mount boxes, compatible with 55×55-mm switch series (64×64-mm adapter included).

Go to product
93176

PB6-KNX-ST

white

6-gang KNX wall-mounted push-button switch with LED status indicators for 60-mm flush-mount boxes, compatible with 55×55-mm switch series (64×64-mm adapter included).

Go to product
90411

BIA4-KNXs REG

KNX binary input for DIN rail mounting with four galvanically isolated inputs for external voltages ranging from 12 to 230 V.

Go to product
90412

BIP4-KNXs REG

KNX binary input for DIN rail mounting with four galvanically isolated inputs for potential-free contacts.

Go to product
93412

PBM-KNXs-DX-4W

KNX flush-mounted push-button interface with four channels that can be flexibly configured as potential-free inputs or LED binary outputs.

Go to product
KNX B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

KNX B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

KNX B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

KNX B.E.G. Brück Electronic GmbH

Individual building solutions

The buildings of the future are automated, with a high demand need for energy-efficient convenience. B.E.G. sensors and actuators are used worldwide, e.g., in the control of office buildings, industrial companies, production facilities and logistics centres. They can be found in universities, schools, hotels, banks, shopping centres, multi-storey car parks and many other buildings. We are proud to contribute to the sustainable operation of buildings around the world.

KNX B.E.G. Brück Electronic GmbH

Local advice:

Our office is always at your side for advice and action. For questions on ordering, products, technology or planning, just contact us:

For questions about technics, please dial: